Steel entry doors
Steel entry doors — strong, efficient and easy on the budget
Steel doors deliver serious security and insulation at the lowest price of any exterior door material. We install steel doors for front entries, side and utility doors, and the door between your garage and house — with the finish details that keep them rust-free in Florida.
- Most affordable exterior door
- Foam-insulated core
- Fire-rated options
- Impact-rated options
- Locally owned & operated
- Licensed & insured
- Permits & inspections handled
- Written workmanship warranty
- Free written estimates
Tough, efficient and affordable
A steel entry door is a thin steel skin wrapped around an insulating foam core, framed with stiles and rails. It is strong, it seals tightly with magnetic weatherstripping, and it is the most affordable way to replace a worn-out door with a complete, sealed entry system.
That makes steel a great fit for side doors, garage service doors, laundry-room exits and the door between the garage and the house, where durability and code compliance matter more than decorative detail. On a covered front porch, a crisply painted steel door can look every bit as good as a pricier material.
Getting the details right
The difference between a steel door that lasts and one that rusts out at the bottom is mostly in the details:
- Rot-proof frames and bottom rails, so there is no wood to soak up water from sprinklers.
- A sill set in sealant or on a sill pan, so water that reaches the threshold drains out, not in.
- Quality exterior paint over factory primer — and prompt touch-ups if the finish gets scratched.
If you like the idea of steel but want a woodgrain look or a front door on a sunny, exposed elevation, we will also price a comparable fiberglass door so you can compare.
Why steel entry doors
Why homeowners choose steel
Strength and security
A steel skin over a rigid core is tough to force, especially paired with a reinforced frame and long strike screws.
Best value
Steel is usually the least expensive way to get a new, sealed, insulated entry system — often the smart choice for side and utility doors.
Well insulated
Polyurethane foam cores and magnetic weatherstripping create a tight seal against heat and humidity.
Fire-rated options
Steel doors are available with fire ratings for the opening between an attached garage and the house.
Styles & configurations
Steel door styles
Steel doors come smooth or with an embossed woodgrain, in classic and modern designs.
Six-panel & two-panel
Traditional raised-panel designs that suit colonial, ranch and transitional homes.
Shaker & flush
Clean, flat panels for modern and farmhouse looks — great in bold paint colors.
Half-lite & full-lite
Glass inserts bring light into dark hallways and laundry rooms. Choose blinds-between-glass for privacy.
Garage-to-house doors
Fire-rated steel doors that meet code for the opening between an attached garage and living space.
Side & utility doors
Durable, low-cost replacements for side-yard, pool-bath and garage service doors.
Impact-rated steel
A cost-effective way to add impact protection to secondary openings.
Where they work best
Where steel makes the most sense
Garage entries and side doors
Doors that need strength and a fire rating more than decorative detail.
Budget-conscious projects
When the goal is a sealed, secure, code-compliant door without a premium price.
Covered front entries
Under a porch or overhang, a painted steel door looks sharp and stays cooler.
Rental properties
A tough, affordable door that stands up to heavy use and frequent lock changes.
Florida code & climate
Keeping steel doors rust-free in Florida
Steel's weak spot in Florida is moisture at the bottom of the door, especially where sprinklers or reclaimed water hit the entry. A good installation and a few simple habits prevent it.
How impact ratings work- We aim sprinklers away from doors during installation walkthroughs and recommend you keep them that way.
- Scratches through the paint should be touched up promptly so the steel skin never sits bare.
- Composite bottom rails and frames on better steel lines eliminate the wood that rots at the bottom.
- Steel skins get hot in direct afternoon sun, so lighter colors are a smart choice on exposed entries.
Before you order
Before you order a steel door
-
Skin thickness
Lower gauge numbers mean thicker steel and better dent resistance. Ask which gauge you are being quoted.
-
Edges and frame
Look for composite or steel edges and a rot-proof frame rather than untreated wood.
-
Paint plan
Factory primed doors need a quality exterior paint. Factory-finished doors cost more but save a step.
-
Glass and privacy
Decide early if you want glass — full-lite and half-lite styles change the price and the look.
What's included
Every steel entry door installation includes
One company handles the product, the permit and the installation — so one company is accountable for the result.
- Free in-home measurement and a written, itemized quote
- Building permit, product approval paperwork and inspection scheduling
- Floor and furniture protection throughout the job
- Removal and disposal of the old door and frame
- Fire-rated door, frame and hardware for garage-to-house openings where required
- Prime and paint coordination for factory-primed doors
- Sweep and magnetic weatherstrip adjusted for an even seal
- Clean-up, hardware adjustment and a walkthrough with you
- Written workmanship warranty plus manufacturer warranty registration
Typical investment
What steel entry doors cost
| Steel entry door (standard, non-impact) | $1,100 – $2,600 |
|---|
Illustrative installed ranges for typical Central Florida projects, including standard removal, installation and trim. Your written quote is the only number that counts — size, glass, impact rating, hardware, finish and opening condition all move the price.
Read the full cost guideHow your project runs
Call → in-home measure → written quote → order & permit → installation → inspection & walkthrough.
See our full processQuestions
Steel Entry Doors: frequently asked questions
Do steel doors rust in Florida?
They can if the paint is scratched and the steel stays wet — usually at the bottom edge near sprinklers. With a sound finish, composite bottom rail and sprinklers aimed away, a steel door can last many years.
Is steel more secure than fiberglass?
Both are very secure when paired with a solid frame, reinforced strike and quality deadbolt or multipoint lock. The frame and lock matter more than the skin material.
Can a steel door look like wood?
Some steel doors have an embossed woodgrain that can be painted or stained, but for a convincing wood look, woodgrain fiberglass is usually the better choice.
What door is required between my garage and house?
Code requires a solid-core or fire-rated door (steel doors are a common choice) for the opening between an attached garage and the home. We install compliant doors and hardware.
Are steel doors energy efficient?
Yes. A foam-filled steel door with good weatherstripping insulates far better than a solid wood door of the same thickness.
Compare
Related door types
Fiberglass Entry Doors
The best all-round front door for Florida — won't rot, rust or warp, with a smooth or woodgrain finish.
Explore fiberglass entry doorsEntry Doors
Complete front door systems in fiberglass, steel or wood — with sidelites, transoms and impact glass.
Explore front entry doorsStorm & Screen Doors
Full-view, retractable-screen and security storm doors — breeze and light without the bugs.
Explore storm & screen doorsInterior Doors
Solid-core shaker, panel and glass doors — a quick, quiet upgrade for one room or the whole house.
Explore interior doorsDoor guides
Read before you buy
Fiberglass vs. Steel vs. Wood Entry Doors: Which Holds Up Best in Florida?
A plain-English comparison of fiberglass, steel and wood front doors for Central Florida's sun, humidity and storms — cost, upkeep and best uses.
How Much Does Door Replacement Cost in Orlando? (2026 Price Guide)
Typical installed prices for entry, patio, impact, garage and interior doors in Central Florida — and what drives the cost up or down.
Door Hardware & Smart Locks: Multipoint Locks, Keyless Entry and Finishes That Last
How to choose handlesets, deadbolts, multipoint locks and smart locks for new doors — plus finishes that stand up to Florida humidity.
Service areas
Steel Entry Doors installed across Central Florida
We install steel entry doors throughout Orange, Seminole, Osceola, Lake and inland Volusia counties.
Ready to price your steel entry door?
Tell us which doors you want to change. Your in-home estimate is free, comes with a written price, and there is never any pressure to decide on the spot.
Military, first-responder & senior discounts available.